What unlocks gunsmith part 9?

We need a SIG P226R, Stainless Elite Wooden grip, Stainless Elite slide, extended magazine and a flashlight . Ergonomics not below 80, recoil sum not above 610.

How to complete mechanic first quest tarkov?

How to complete the quest? It is recommended to use a weapon with a durability of 100 , as the Mechanic may not accept a weapon with low durability (in fact, anything over 60 will be fine). MP-133 specifications:60 Durability, 47 or greater ergonomics, 850 or less recoil sum, 4 or fewer slots.

What is armorer Gunsmith?

A gunsmith is a person who repairs, modifies, designs, or builds guns. The occupation differs from an armorer, who usually replaces only worn parts in standard firearms .

How do you unlock Rupert the Gunsmith?

Speak to Fidan at the Harran University after looking for Jade during the quest "Higher Education" to learn that Rupert, their gunsmith, has been missing for a while. Head for his flat to find Rupert and talk to him. Once at the flat, head down two flights of stairs and enter the children's room to find Rupert .

How to unlock Jaeger Tarkov 2024?

After you complete Gunsmith Part 1, the Introduction quest will become available. To start it, go to Mechanic's quest screen and accept Introduction . This sets you on the path to unlocking Jaeger.

Where to find Jaeger in Woods?

In this quest you have to find Jaeger's encrypted message on Woods. The message is located under a hunting stand which is located in the eastern part of the location, near the crashed plane . Once you have obtained the message, you must extract from the location and hand it over to Mechanic.

ESCAPE FROM TARKOV MECHANIC GUNSMITH QUEST GUIDE

ByMarcus Alden|March 21, 2019

The Gun Mechanic Quest has 16 parts. All of them ask that players modify guns in specific ways. You’ll have to collect the Escape from Tarkov items through trading or looting around. Here, we’ll list those specifications, so take notes!

Part One (Level 10)

Modify an MR-133 so it fits the following specifications:

At least 55 ergonomics
800 or less recoil
Takes up four or fewer cells
The magazine has a capacity of six or more
A laser attachment (flashlight and laser combo is also okay)

Part Two (Level 11)

This time it’s an AKS-74U you have to modify. The specifications are:

60 minimum ergonomics
Less than or at least 500 recoil
At least 100 sighting range
5kg or lighter
Six or less cell size
The B-11 AKS-74U Handguard is attached
The magazine is a 60 round 6L31 5.45×39 magazine, compatible with AK-74 and similar guns

Part Three (Level 12)

Get an MP5 and modify it to satisfy the following requirements:

Ergonomics is at 62 or greater
Has a minimum 200 sighting range (the standard HK MP5 Drum Rearsight is recommended)
150 maximum recoil
Weight is no greater than 3.8kg
X Products X-5 MP5 50-round 9×19 magazine
MP5SD 9×19 Silencer attached
Has a tactical flashlight (any flashlight + laser combo attachment)

Part Four (Level 15)

The gun you have to modify is the M4A1, to these specifications:

Minimum 64 ergonomics
At most has 300 recoil
Has at least 800 sighting range
Weighs 3.8kg or less
Has a 60-round extended mag (the 60-round MAG5-60 5.56×45 STANAG recommended)
Has a silencer (Silencerco Hybrid 46 multi-caliber silencer recommended)

Part Five (Level 17)

Grab a DVL-10 and modify it. The specifications are:

Ergonomics at 36 or higher
350 at most recoil
At least 2,000 sighting range
6kg or lighter in weight
Has any laser device attached

Part Six (Level 18)

Here are the specifications for modifying an R11 RSASS.

At least 62 Ergonomics
Recoil at 250 or less
Sighting range at 1,500 or more
Weighs 6.5kg or less
Has a silencer

Part Seven (Level 19)

You’ll have to modify a Remington Model 870 to these specifications:

Has at most 340 recoil
Has 60 or greater ergonomics
Tactical Unit (Torch)
Magpul MOE M870 forestock
SGA stock for M870

Part Eight (Level 19)

Trade for an AKM and modify it. It should have the following characteristics:

Less than or equal to 310 recoil
More than or equal to 58 ergonomics
More than or equal to 800 sighting range
Has the Fortis Shift tactical grip attached
Has a silencer attached
The magazine is a Pmag 30 AK/AKM GEN M3 7.62×39 magazine for AK and compatibles, 30-round capacity

Part Nine (Level 20)

Give the Mechanic an AKS-74N. The required characteristics are:

Maximum 380 recoil
Minimum 63 ergonomics
Takes up 8 or fewer cells
Has the Zenit RK-3 AK pistol grip
Has both the AKS-74/AKS-74U PT Lock and Zenit PT-3 “Klassika” stock
Has Zenit B-33 dust cover for AK-74 attached
Has the B-10M foregrip and rail mount B-19 attached
Has the Zenit DTK-1 7.62×39 & 5.45×39 muzzle brake & compensator for AK attached

Part Ten (Level 20)

The Mechanic will ask for an AK-105 with the following characteristics:

It has recoil at 420 or less
Its ergonomics is at 70 or more
It has 800 or higher sighting range
Weighs 4.8kg or less
Takes up 8 or fewer cells
Has a silencer attached
Uses the 60-round 6L31 5.45×39 magazine for AK-74 and compatibles

Part Eleven (Level 20)

After that, he’ll ask for an AS VAL that has these characteristics:

It has ergonomics at 44 or more
Its recoil does not exceed 120
The Fab Defence GL Shock Stock is attached
An AN/PEQ-15 tactical device is attached
The NSPU-M night scope is attached
Uses the 30-round SR3M.130 9×39 SR3M magazine

*A bug triggers when you remove the standard stock from the gun when it’s still folded. Make sure it’s unfolded before you start modding.

Part Twelve (Level 23)

Find and modify an AK-102 so it has the following

Ergonomics at 57 or greater
Recoil at 430 or less
Sighting range at 500 or more
Takes up 8 or fewer cells
Has the Rotor 43 5.56×45 muzzle brake
Has the Magpul AFG grip OD
Has a 2U “Kleh” tactical flashlight

Part Thirteen (Level 25)

The next gun to modify is an MPX, and here are the requirements

A Skeletonized AR-15 pistol grip is attached
An Annihilator 7.62×39, 5.56×45 and 9mm muzzle & compensator for AR-15 is attached
A LAS/TAC 2 tactical flashlight
300 or higher sighting range
62 or greater ergonomics
Weighs 4kg or less
170 or less recoil

Part Fourteen (Level 27)

Customize an AKMN to fit the following requirements

A Magpul MOE AK HAND GUARD for AK Black is attached
A MOE Carbine stock Black is attached
A Magpul MOE pistol grip for AK is attached
It uses a Pmag 30 AK/AKM GEN M3 7.62×39 magazine for AK and compatibles, 30-round
A Magpul M-LOK AFG Tactical grip Black is attached
A Rotor 43 7.62×39 muzzle brake is attached
It has a recoil of 280 or less
It has ergonomics at 62 or more
It weighs 5kg or less
It has a sighting range of 500 or higher

Part Fifteen (Level 29)

Slap on some mods on an M1A so it fits the following

Ergonomics at 26 or more
Recoil at 270 or less
Weighs 7.3kg or less
Has the M14 Ultimak M8 upper part attached
Has a Nightforce ATACR 7-35×56 Riflescope
Has the Aimpoint Micro T-1 reflex sight
Has a Holosun LS321 Tactical device

Part Sixteen (Level 35)

The last gun to modify is an M4A1, and it has to have the following:

67 minimum ergonomics
220 maximum recoil
5kg maximum weight
A KAC QDSS NT-4 FDE 5.56×45 silencer
A Handguard MK 10 for use with AR-15 and compatible
A Trijicon REAP-IR thermal riflescope
A 60-round extended magazine

Additional Notes

If a specific mod is not in parenthesis, that’s the exact mod that needs to be applied. Otherwise, if you have something that fits the requirement, it’ll do. Get what you need by participating in Escape from Tarkov trading, or by looting certain weapons boxes or containers. Sometimes, you’ll need something that’s a reward from other quests, so do those first. Other times, you’ll have to search in the flea market for the things you need.

Anyway, that’s all that you need to complete the Gunsmith tasks in Escape from Tarkov. It’ll take some time to complete all of them, so don’t worry about rushing to finish all of them.

Continue enjoying Escape from Tarkov!

Related ItemsESCAPE FROM TARKOVgamesrant

ESCAPE FROM TARKOV MECHANIC GUNSMITH QUEST GUIDE - GameNGadgets (2024)

Related

FAQs

What unlocks gunsmith part 9? ›

References