PAGE 1 ™ SpinScrub with MAX Extract ™ ™ The Easy to Use Deep Cleaner Congratulations on your purchase ™ ™ SteamVac SpinScrub cleaners have 6 rotating brushes that deep clean carpets and scrub bare floors! SteamVac™ SpinScrub™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.
PAGE 2 Fill in and Retain This HOOVER deep cleaner is designed for deep cleaning carpet, rugs, carpeted stairs and upholstery. The model and serial numbers are located on the data label on the back of the handle. For your personal records, please enter the COMPLETE model and serial numbers in the spaces provided and retain this information. Your deep cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner s manual.
PAGE 3 Grounding Instructions D A F B G E DANGER- C This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordinances.
PAGE 4 The assembled cleaner will look like this drawing. Assemble handle 1-3 A1 1-2 A2 Attach upper handle Remove clean solution tank (upper tank) from deep cleaner. 1-4 1-5 B With hose hook (A1) and cord hook (A2) to back of deep cleaner, push upper handle down onto lower handle. Push bolts into holes on front of handle. If bolts will not go through hole easily handle is not pushed completely down.
PAGE 5 1-11 1-10 1-12 F A2 G H Storing hose & tools Press cord into cord clip on back of handle. Pull cord tight and wrap cord around hooks (A2). Store hose on rack by first positioning hose in front section of clip. Continue wrapping hose over upper hose hook (F) and under lower hook (G). Snap hose end fully into holder (H). Ensure that the hose end is pushed down completely into holder (H). 1-13 1-14 1-15 I Slide crevice tool (I) into holder.
PAGE 6 2. How to use Deep Cleaner Description 2-1 1 3 2 6 4 8 7 9 10 11 12 5 27 13 14 24 15 7 26 16 17 18 25 22 20 23 19 21 The assembled deep cleaner will look like the drawing. 1. Hand grip 2. Solution trigger: press to release clean solution. 3. Clean Surge™ button 4. Hose 5. Hose holder: wrap hose around holder and top hose hook (6) for storage. 6. Hose hook 7. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for quick and easy cord release. 8.
PAGE 7 Amber and green lights 2-6 2-5 E G F The deep cleaner may also be lifted by placing a hand under the upper clean solution tank handle as shown. When the deep cleaner senses that dirty solution is being picked up, the amber light (F) will come on. When the deep cleaner senses that little or no dirty solution is being picked up, the green light (G) will come on. When the amber light is on, continue taking dry cleaning strokes until the green light comes on. Then move on to the next area to be cleaned.
PAGE 8 2-11 2-10 5 OUNCES/ 150 ml A Carry tank to a sink. Rotate tank cap counterclockwise and lift up to remove cap. For heavy traffic areas: Pre-treat with HOOVER PreCleaner* Spray. If you do not have access to the PreCleaner Spray, double the amount of HOOVER Detergent (use 2 capfuls or 10 ounces per 1 gallon tank). *Available at additional cost if not included with your model. Turn cap (A) upside down to serve as a measuring cup. Using cap, measure detergent following the chart below.
PAGE 9 For full suction, it is important that the recovery tank lid is properly secured before cleaning. Raise tank handle to carrying position to place it into base of deep cleaner. Move handle completely forward to lock tank into place (see Fig. 2-16). Raise handle of deep cleaner to upright position and reposition upper clean solution tank. Do not saturate carpet or upholstery with PreCleaner. If you do not have access to the PreCleaner Spray, double the amount of HOOVER Detergent (use 2 capfuls or 10 oz.
PAGE 10 To clean nozzle 3-3 If lint or other debris becomes lodged in nozzle, do not attempt to remove nozzle cover. Pour one to two cups of clear water on a non-carpeted floor. Do not pour water onto a wood floor. Pick up the water with your deep cleaner. Repeat as necessary until debris is flushed out of nozzle. Carpet Cleaning Some models have a nozzle clean-out tool for removing debris or if a non-carpeted floor is not available. To use the tool: Disconnect deep cleaner from electrical outlet.
PAGE 11 Cleaning bare floors How to attach bare floor attachment Disconnect deep cleaner from electrical outlet. To prevent possible leaking, remove clean solution tank (Fig. 2-9) and recovery tank (Fig. 2-16) before positioning bare floor attachment. Set tanks aside (do not set tank on furniture). 1. With handle in upright position, tilt cleaner back so that handle rests on the floor. 4. Return deep cleaner to upright position. Lower handle and replace recover y tank. 5.
PAGE 12 3-11 3-12 3-13 G Using the scrub tool After using scrub tool After using tool With a little solution, test the scrub tool on a hidden area before using on the desired surface. If no surface change is visible, continue to use as described below. 1. Fill clean solution tank with HOOVER Bare Floor Cleaner according to instructions for Figs. 2-9 to 2-15. 2. Hold scrub tool above area to be cleaned and press trigger to dispense solution. 3. Release trigger and scrub area with tool.
PAGE 13 3-16 A B 9. Lift tool, and position it against riser. Pull tool slowly over carpet without pressing trigger (dry stroke). It is best to alternate wet and dry strokes as described above. End with more dry strokes and watch for the green ‘MAX Extract’ light to come on to aid in faster drying of carpet. 10. Overlap strokes by 1/2 inch to help prevent streaking. To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes.
PAGE 14 Removable brushes 4-2 4-3 Your deep cleaner is equipped with removable brushes for easy cleaning. To remove brushes Disconnect cleaner from electrical outlet. To prevent possible leaking, remove clean solution tank and recovery tank. Set tanks aside. 2. Pull old bulb straight out of socket. 3. Push new bulb straight into socket until locked into place. Excessive force is not required. Reposition lens and secure with screw. 4-4 Press handle release pedal to lower handle.
PAGE 15 5. If you have a problem If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.
PAGE 16
FAQs
Just fill the water compartment with hot tap water, fill the Soap compartment with Cleaning Solution. Set knob on front of it to "Wash". Replace tank by tilting it back in. There is a step-button on the left to release the hinge, and a step-button on the right to operate Power On/Off (like a standard upright vac).
How much solution do you put in the Hoover Power Scrub? ›
Usually depending on the model of the machine use 2-3 oz in the solution tank and then fill the rest with water." So take your pick... the lable or Hoover customer service.
How to use Hoover Floormate Spinscrub 500? ›
For dry debris pickup, turn the dial to the DRY VAC position. In this position, the brushes will not rotate and are raised off the floor surface. To wet clean with brushes turned ON, turn the dial to the WASH position. For wet pickup, turn the dial to the WET PICK- UP position.
How long does it take for carpet to dry after using Hoover Power Scrub? ›
I rinsed well. I extracted for both wash and rinse very very well. It is nice to have a switch to simply turn then rinse. My carpets dried in an hour !
What solution can I use with Hoover Power Scrub? ›
Any solution will do . I actually used a Bissell solution because it was much cheaper than the Hoover brand. Carpets came out very clean and soft. Like others have mentioned I also used hot water in the water tank.
Do I use hot or cold water in my Hoover carpet cleaner? ›
We recommend using warm water when possible, but either hot or cold water can be used .
Why is my carpet shampooer not picking up water? ›
If your carpet cleaner is not spraying or picking up water, there are a few things to check. Ensure the filter is clean and dry before placing it back in the machine . If water leaks, remove the tanks and fill them with hot tap water. Hold them over the sink with the cap down and inspect for any leaks in the tank.
How much cleaning solution do I put in my Hoover carpet cleaner? ›
4. Add 3 ounces per gallon to warm water in the clean water tank. For AutoMix machines, fill solution tank. Always consult owner's manual.
Does the Hoover FloorMate have a reset button? ›
If "Wet Scrub" is set and the brushes won't spin, the circuit breaker in the Floormate has tripped. To reset the breaker, press the "On/Off" switch down . Though it may be hard to press the button, make sure it is fully pressed. Wait at least one minute and press the "On/Off" button fully down again.
Can I use bleach in my Hoover FloorMate? ›
A: Bleach will degrade the rubber seals and cause leakage over time. On its other floor-cleaning products, Hoover specifically has started saying not to use bleach as it is one of the chief causes of leaking reservoirs (ex, the MaxExtract 77, which is multi-surface hard + carpet).
With spill-free tanks, SpinScrub® Technology, and heated air for faster drying time, you'll get a powerful, efficient clean. Now you can help extend the life of your carpet when you use the Hoover Power Scrub Deluxe Carpet Cleaner. It is designed to clean rug and fabric surfaces in and around your home .
Article information
Author : Rueben Jacobs
Last Updated : 2024-07-01T06:34:40+07:00
Views : 5783
Rating : 4.7 / 5 (77 voted)
Reviews : 84% of readers found this page helpful
Author information
Name : Rueben Jacobs
Birthday : 1999-03-14
Address : 951 Caterina Walk, Schambergerside, CA 67667-0896
Phone : +6881806848632
Job : Internal Education Planner
Hobby : Candle making, Cabaret, Poi, Gambling, Rock climbing, Wood carving, Computer programming
Introduction : My name is Rueben Jacobs, I am a cooperative, beautiful, kind, comfortable, glamorous, open, magnificent person who loves writing and wants to share my knowledge and understanding with you.
